— 12 —
6-1 Disconnection and check of power source of circuit under test
#
DANGER
●
To avoid possible electrical shock, do not perform measurements on
energized (LIVE) circuits.
●
Never make measurements with the battery compartment cover removed.
●
Always Keep your fingers and hands behind the protective fingerguard on
test probe to avoid the possible shock hazard.
#
CAUTION
●
Never press the test button if the live circuit warning LED is lit or the
warning buzzer sounds. This may damage the circuit.
Voltage check can be made with the range selector switch at any position.
Be sure to turn off the breaker for the circuit under test.
①
Connect the earth clip of the test probe (black) to the earth side and the line
probe (red) to the line side of the circuit under test.
②
Ensure that the live circuit warning LED is not lit and the audible warning
is not present. If the LED is lit and the buzzer sounds, never press the test
button. Voltage is generated in the circuit under test. Recheck that the
breaker for the circuit under test is "OFF".
6. Operation
Fig.4
E
L
www.
GlobalTestSupply
.com
Find Quality Products Online at:
