Kyocera TASKalfa 7353ci, Operation Manual

Page: 451 / 723

8-61
Setup and Registration (System Menu) > System Menu
SMB Client (Transmission): Select whether to send documents using SMB. To use the SMB Client, set the
protocol to [
On ]. The default port number is 445.
Value : Off, On
NetBEUI Selects whether to receive documents using NetBEUI.
*1
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
WSD Scan Select whether to use WSD Scan.
*1
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
WSD Print Set whether to use our proprietary web services. WIA driver, TWAIN driver and
Network FAX driver use this Enhanced WSD web service.
*1
Value : Off, On
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
i-FAX Select whether to use i-FAX.
Value : Off, On
NOTE
This function is displayed when the optional Internet FAX Kit is activated.
DSM Scan Select whether to use DSM scan.
*1
Value : Off, On
ThinPrint Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to
[
On ]. The default port number is 4000.
*1, *2
Value : Off, On
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Wi-Fi Direct Set whether to enable this function for each network.
Value : Disable, Enable
Wi-Fi
Wired Network
Thin Print over SSL To use the Thin Print over SSL protocol, set [ Thin Print Over SSL ] and [ SSL ] to [ On ].
Value : Off, On
NOTE
When selecting [ On ], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Item Description