Kyocera TASKalfa 4002i, Operation Manual

Page: 228 / 662

5-21
Operation on the Machine > Copying
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately.
When the interruption copy ends, the machine resumes the paused print jobs.
1
Configure the settings.
1
Select the [ Interrupt ] key.
The current print job is temporarily interrupted.
2
Place the originals onto the machine for interrupt copy, and configure the copy settings.
2
Press the [Start] key.
Interrupt copying begins.
3
When interrupt copying ends, select the [Interrupt] key.
The machine resumes the paused print jobs.
Canceling Jobs
1
Select the [Stop] key with the copy screen displayed.
2
Cancel a job.
When there is a job is being scanned
The copy job is canceled.
When there is a job printing or on standby
Canceling job screen appears. The current print job is temporarily interrupted.
Select the job you wish to cancel > [ Cancel ] > [ Yes ]
NOTE
• If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and
printing resumes.
You can change the delay until interrupt copying is canceled. Change the delay as required.
Interrupt Clear Timer (page 8-69)
• The interrupt copy function may be unavailable depending on the status of document finisher usage. In this case, try
the priority override.
Priority Override (page 6-65)
NOTE
If "Reserve Next Priority" is set to [ Off ], the Copying screen appears in the touch panel. In such case, selecting the [ Stop ]
key or [ Cancel ] will cancel the printing job in progress.
Reserve Next Priority (page 8-32)