52
Network
Enable Privacy Alert
From
Privacy Alert
, select
Enabled
to set your
phone to alert you when enhanced digital CDMA
privacy is lost or regained.
Enable Voice Privacy
From
Voice Privacy
, select
Enhanced
to use
enhanced digital CDMA privacy.
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
From
Roam/Svc Alert
, select one of the following:
• Disabled
turns roaming service alert off.
• When no svc
alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
• On roam change
alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
• On any change
alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
From
Roam Option
, select
Automatic
(to allow
roaming) or
MetroPCS Only
(to disallow
roaming).
Set Phone Line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Note:
You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection.
From
Set Phone Line
, read the note and select
OK
and one of the phone lines.
When using one line, you cannot receive calls
from the other. It would be as if the phone were
“off” for that number. Your voicemail, however,
still takes messages. All contacts and settings are
shared for both lines.
Set Location Information
Use
Location
to share your location information
with network services other than emergency
services (for example, 911, 111, 999 and 000) in
serviced areas. This feature works only when your
phone is in digital mode. You do have the option
of turning off the locator to emergency services.
