Kyocera ECOSYS MA2100cfx, Operation Manual, Page: 192 / 408

5-36
Operation on the Machine > Handling Destination
Confirmation Screen of Destinations
When selecting [ On ] for Destination Check before Send, the confirmation screen of destinations appears after pressing
the [ Start ] key.
DestinationCheck (page 8-36)
1
Confirm all destination.
To show the detailed information of the destination, select the destination and [ OK ] key >
[▲] [▼] key > [ Detail ] > [ OK ] key
To delete the destination, select the destination you want to delete and [
OK
] key > [▲] [▼] key >
[
Delete
] > [
OK
] key > [
Yes
]
The destination is deleted.
2 Select [ Next ].
Recall
Recall is a function allowing you to send the last entered destination once again. When you want to send the image to
the same destination, select the [ Address Recall/Pause ] key, and you can call the destination you sent on the
destination list.
1
Select the [Address Recall/Pause] key.
The destination you sent is displayed on the destination list.
2
Press the [Start] key.
Sending starts.
NOTE
Be sure to confirm all destination by displaying them on the message display. You cannot
select [ Next ] unless you have confirmed all destination.
NOTE
When the last sending included FAX, folders and E-mail destinations, they are also
displayed. If necessary, add or delete the destination.
NOTE
• When [
On
] is selected in "Check beforeSend", a destination confirmation screen is
displayed when you press the [
Start
] key.
Confirmation Screen of Destinations (page 5-36)
• Recall information is canceled in the following conditions.
- When you turn the power off
- When you send a next image (new recall information is registered)
- When you log out