Kyocera ECOSYS M3860idn, Operation Manual

Page: 354 / 483

9-4
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Setting User Login Administration
This registers, alters and deletes users and configures the settings for User Login Administration.
Authentication Security
If user authentication is enabled, configure the user authentication settings.
User Account Lockout Setting
You can prohibit the use of a user account if an incorrect password is entered repeatedly to login with that account.
1
Display the screen.
1
[ System Menu/Counter ] key > [ User Login/Job Accounting ]
2
[ User Login Setting ] > [ Authentication Security ] > [ User Account Lockout Settings ]
2
Configure the settings.
The following settings can be selected.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [ Login ]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 6000
Login Password: 6000
Item Descriptions
Lockout Select whether or not account lockout policy is enabled.
Value : Off, On
Lockout Policy Specify the conditions and the extent to which the account lockout is
applied.
Value
Number of Retries until Locked:
Specify how many login retries are allowed until
the account is locked out.
(1 to 10 times)
Lockout Duration: Specify how long the account is to be locked out
until it is unlocked.
(1 to 60 minutes)
Lockout Target Specify the extent to which the account lockout
is applied. You can select from [All] or [Remote
Login Only]. Remote Login Only locks out all
operations from outside the operation panel.
Locked out Users List Displays a list of locked out users. You can unlock a user by selecting the
user in the list, and selecting [
Unlock ].
NOTE
This function is displayed when account lockout policy is enabled.