Kyocera ECOSYS M2135dn, Operation Manual, Page: 194 / 410

5-34
Operation on the Machine > Handling Destination
Confirmation Screen of Destinations
When selecting [ On ] for Destination Check before Send, the confirmation screen of destinations appears after pressing
the [ Start ] key.
DestinationCheck (page 8-35)
1
Confirm all destination.
To show the detailed information of the destination, select the destination and [ OK ] key >
[ ▲ ] [ ▼ ] key > [ Detail ] > [ OK ] key
To delete the destination, select the destination you want to delete and [ OK ] key > [ ▲ ] [ ▼ ] key >
[ Delete ] > [ OK ] key > [ Yes ]
The destination is deleted.
2
Select [ Next ].
Recall
Recall is a function allowing you to send the last entered destination once again. When you want to send the image to
the same destination, select the [
Address Recall/Pause ] key, and you can call the destination you sent on the
destination list.
1
Select the [Address Recall/Pause] key.
The destination you sent is displayed on the destination list.
2
Press the [Start] key.
Sending starts.
NOTE
Be sure to confirm all destination by displaying them on the message display. You cannot
select [
Next ] unless you have confirmed all destination.
NOTE
The products without the fax function have the [ Address Recall ] key instead of the [ Address Recall/Pause ] key.
NOTE
When the last sending included FAX, folders and E-mail destinations, they are also
displayed. If necessary, add or delete the destination.
NOTE
• When [ On ] is selected in "Check beforeSend", a destination confirmation screen is
displayed when you press the [ Start ] key.
Confirmation Screen of Destinations (page 5-34)
• Recall information is canceled in the following conditions.
- When you turn the power off
- When you send a next image (new recall information is registered)
- When you log out