6
Get Started
4.
When charging is complete, remove the cable from the port and close the cover.
NOTE:
Make sure the USB/Charger port cover is securely closed to maintain your
phone’s waterproof seal.
WARNING:
Do not use the phone under water if the SIM/microSD card tray cover,
USB/Charger port cover, or headset jack cover is broken or open.
Charge the Battery Wirelessly
Your phone supports Qi and works with Qi-enabled chargers. Follow the steps below to charge
the battery using a wireless charger (sold separately).
1.
Locate the charging area on your wireless charger by referring to the charger
documentation.
2.
Place your phone ensuring that the charging area of your phone touches the charging
area of your wireless charger.
Before starting wireless charging, please note the following:
●
If the charging areas are not touching, the charging results will be poor.
●
Make sure there is nothing between your phone and wireless charger, especially
anything metal.
●
Your phone may become hot while charging the battery.
●
If charging doesn’t start after positioning your phone correctly, please use the AC
adapter that came with your phone.
For more information on wireless charging, see your wireless charger documentation.
Install microSD Card and Reinstall SIM Card
Inserting a compatible microSD card into your phone will increase its storage capacity. Your
phone comes with a preinstalled SIM card. If you need to reinstall your SIM card, follow the
instructions below.
Summary of Contents for DURAFORCE ULTRA 5G
Page 1: ...User Guide ...
Page 2: ......
Page 12: ...x TOC Drying Your Phone 105 Copyright Trademarks 106 ...