Kyocera C5020N - FS Color LED Printer, Service Manual

Page: 168 / 216

2F3/2F4
2-1-26
2-1-6 Fuser section
(1) Fuser unit (16 ppm printer)
The fuser unit is composed of the heat roller, press roller, fuser heater lamp 1, fuser heater lamp 2, and the change guide.
Paper sent from the secondary transfer and separation section is applied with heat and pressure to permanently fuse
toner on paper. The change guide switches the destination of paper to the face-down tray or optional face-up tray. It also
sends paper to the duplexer.
Figure 2-1-35 Fuser unit (16 ppm printer)
AL
3
4
AM
AN
6
8
9
1 AK
7
5
AT
(1) Upper fuser frame
(2) Lower fuser frame
(3) Upper exit roller
(4) Lower exit roller
(5) Heat roller
(6) Press roller
(7) Fuser heater lamp 1
(8) Fuser heater lamp 2
(9) Lower fuser cover
(10) Lower entrance guide
(11) Stay plate
(12) Change guide
(13) Exit guide
(14) Fuser frame