Kyocera BG-800, Owner'S Operating Manual

Page: 4 / 12

ー
3
ー
SPECIFICATIONS
Model HBG-6E BG-800
Power 250 W 375 W
Size of Grinding Wheel 150 X 19 X 12.7 mm 200 X 25 X 15.9 mm
No Load Speed 50Hz 2,850 min
-1
2,850 min
-1
60Hz 3,450 min -1 3,450 min -1
Net Weight 9 kg 15 kg
UNPACKING
Unpack the carton and check your machine to see that the following parts are included.
1. Main Body (switch and electrical cord are connected).
2.
Accessories
One set of tool rests and necessary screws, nuts and washers.
One set of eyeshields, spark breakers and necessary screws, nuts and washers.
NOTE : If you find any parts missing or damaged, contact the dealer for exchange or replacement.
VOLTAGE
Ensure the supply voltage is the same as the voltage stated on the nameplate.
GROUNDING
1. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electrical
current to reduce the risk of electric shock. This tool is equipped with an electric cord having an
equipment grounding conductor and grounded plug. The plug must be plugged into a matching outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
2. Do not modify the plug if it will not fit the outlet. If necessary, have the proper outlet installed by a
qualified electrician.
3. Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in dobt as to whether the tool is properly grounded.
4. Use only 3-wire extension cords that have 3-pin plugs and 3-inlet sockets that accept the tool's plug.
5. Repair or replace damaged or worn cord immediately.
6. If unsure, check with manufacturer or a qualified electrician.
FEATURE
1. This machine uses ball bearings for larger tool life.
2. Supplied with one fine and one coarse grinding wheel.
3. Removable wheel guards for simplified wheel changes.
4. Adjustable tool rests to give you the correct working angle.
5. Accessories of eyeshields. spark breakers and tool rests are included.