![Kyocera BELL WIRELESS Quick Start Manual Download Page 5](http://html1.mh-extra.com/html/kyocera/bell-wireless/bell-wireless_quick-start-manual_2016491005.webp)
Quick Start Guide for Kyocera Passport PC Card
2
Q
UICK
S
TART
I
NSTRUCTIONS
Installation
Warning:
DO NOT insert the Passport PC card
before you install the software onto your
notebook PC.
System Requirements
Your Passport functions in notebook PCs with
these Windows
®
operating systems:
Windows
®
2000
Windows
®
XP
To install Passport and the software, these
minimum system resources are required:
Card slots: Type II PC Card slot (CardBus)
Disk Drive: CD-ROM
Memory: 32 MB
Disk Space: 14 MB
Processor: Pentium 166 MHz or higher
Dial Up Networking: DUN bound to TCP/IP
Tracking Usage
Kyocera and its vendors do not warrant that any
usage tracked by the software will correspond
with the usage measured by your wireless carrier.
Specifically, your wireless carrier may calculate
usage on a different basis than this software. In
any case of inconsistency between usage statistics
calculated by this software versus those calculated
by your wireless carrier, your wireless carrier's
usage data shall be deemed to be correct.
Setup Instructions
Important:
Install the software before you
insert the Passport PC Card into the
computer for the first time. Only after the
software is installed can Windows
successfully detect and configure the
PC card.
1.
Close any Windows programs that are running
and insert the CD that came with Passport into
your CD-ROM drive. Setup should start
automatically. If the program does not launch
automatically, select
Start
→
Run...
from
the taskbar.
Enter
D: Setup.exe
(where D is the letter of
your CD-ROM drive) and click
OK
to launch
the installation wizard.
2.
Select a language from the dropdown menu
and click
OK
.
3.
Click
Next
to begin installing Passport
components onto your computer.
4.
Read the License Agreement, select
I accept
the agreement
, and click
Next
.
5.
Select a destination folder for your files,
or use the default location and click
Next
.
6.
Select a location for the program shortcuts,
or use the default provided. Click
Next
.
7.
Place a checkmark in the Create a desktop
icon box and click
Next
.
82-N8763-1EF.book Page 2 Monday, October 10, 2005 1:24 PM