Kyocera 1102RX3NL0 Operation Manual Download Page 135

Page: 135 / 242

6-12

Setup and Registration (System Menu) > System Menu

TCP/IP (IPv6)

Restart Network

Wired Network

[

Menu

] key > [

▲

] [

▼

] key > [

Wired Network

] > [

►

] key

Configure wired network settings.

Item

Description

TCP/IP (IPv6)

Select whether to use TCP/IP (IPv6).

Value

: Off, On

RA(Stateless)

Select whether to use RA (Stateless).

Value

: Off, On

NOTE

This function is displayed when [

TCP/IP (IPv6)

] is set to [

DHCPv6

Select whether to use the DHCP (IPv6) server.

Value

: Off, On

NOTE

This function is displayed when [

TCP/IP (IPv6)

] is set to [

IMPORTANT

After changing the setting, restart the network or turn the machine OFF and then ON.

Item

Description

Restart Network

Restarts the network.

Item

Description

TCP/IP

For details on setting value.

TCP/IP (page 6-11)

TCP/IP (IPv6)

For details on setting value.

TCP/IP (IPv6) (page 6-12)

LAN Interface

Specify the settings for the LAN interface to be used.

Value

: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T

Restart Network

Restarts the network.

IMPORTANT

After changing the setting, restart the network or turn the machine OFF and then ON.

Summary of Contents for 1102RX3NL0



















































































































































































































































Search results

Summary of Contents for 1102RX3NL0

Reviews:

Related manuals for 1102RX3NL0

Brands by name

Popular brands

Kyocera 1102RX3NL0, Operation Manual

Search results

Summary of Contents for 1102RX3NL0

Reviews:

Related manuals for 1102RX3NL0

Brands by name

Popular brands