2
QUICK START GUIDE
1. Power-on
Turn on the POWER switch of skateboard first (on the cover plate at the
bottom of skateboard), and then turn on the power switch of remote control.
2. Inspect the speed mode
Inspect the speed display of the remote control. Press L/H button to toggle
through 4 speeds (Low, Med, High, H+). It is advised that a rider should put
the speed mode on Low or Medium during first use.
3. Stand on the board
Have a wide stance, bend your knees slightly, keep feet so they won’t touch
the wheels while turning. The front of the board has the crown logo; make
sure to face the correct direction for riding (goofy vs. regular foot).
4. Control forward acceleration
PLACE REMOTE STRAP SECURELY on your wrist. Push the throttle up-
ward to accelerate slowly. When accelerating, lean forward and put your
weight towards the front foot. Lean on your heels/ toes to turn left/ right.
5. Decelerate and braking
Before riding, inspect the brake sensitivity (B1,2,3,4) on the LED display.
Toggle modes by pulling back on the throttle and pressing LED button at the
same time, recommended to start on B1. While riding, pull the throttle down-
ward SLOWLY until you reach a full brake. DO NOT SLAM THE BRAKE
when you are going fast, this may cause you to fall.
6.
Power-off
Turn off the power switch of the electric skateboard and remote control. If the
electric skateboard and remote control are not operated within 10 minutes,
they will shut down automatically.
