16
4.5 Dismantling for Transportation
●
Disassembling: disassemble the device in the order
shown in the figures
1. Remove the battery binder (see Figure 1)
2. Remove battery contacts and left/right motor
contacts (see Figure 2)
3. Remove battery (see Figure 3)
4. Remove battery holder latch (see Figure 4)
5. Remove battery holder
6. Remove rear auxiliary handle (see Figure 5)
7. Remove Kerb-Rider if fitted (see Figure 6)
8. Remove the cushion and the velcro of back rest
(Figure 7)
9. Retract leg rests to the sides
10. Pull and fold up the seat base (see Figure 8)
●
Assemble: assemble the components in reverse order
of disassembling. Connect the battery and main cables,
and check that the cables are well-connected, as shown
in the figure.
Figure 1
Figure 2
Figure 2
