KYMCO SPIKE 125, Manual, Page: 21 / 46

LIGHTS
ON
－ －
16
(10) HORN/LIGHTS INSPECTION
Turn the ignition switch to the " " position and push the ON
horn button to check if it sounds.
Headlight/Taillight Inspection:
Start the engine and turn on the headlight switch to check
if the headlight and taillight are good and check the light
shells for dirt and damage.
Stoplight Inspection:
Apply the front and rear brake levers respectively to check
if the stoplight is good. And also check the stoplight shell
for dirt and damage.
Turn Signal Light Inspection:
Operate the turn signal switch to make sure whether the
right/left front and rear turn signal lights can wink and
buzz. Also check the light shells for dirt and damage.
Headlight Taillight/ Stoplight Turn signal light
Horn button
Replace any dirty or damaged lights with new ones to
avoid danger during riding.
CAUTION: