KYMCO MXU 500i Manual Download

Page: 99 / 171

7-11

7.10. MODIFICATIONS

POTENTIAL HAZARD

Operating this ATV with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of this

vehicle may cause changes in handling which in some

situations could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this ATV through improper installation or use of

accessories. All parts and accessories added to this vehicle

should be genuine KYMCO or equivalent components

designed for use on this ATV and should be installed and used

according to instruction. If you have question, consult an

authorized ATV dealer.

7.10.1. No modifications

Modifying this ATV or removing original equipment may render

the vehicle unsafe or illegal. Spark arresters and mufflers are

required in most areas. Don't modify your exhaust system or

emission control system components. Remember, excessive

noise bothers everyone and creates a bad image for ATV.

Summary of Contents for MXU 500i












































































































































































Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands

KYMCO MXU 500i, Manual

Search results

Summary of Contents for MXU 500i

Reviews:

Related manuals for MXU 500i

Brands by name

Popular brands