KYMCO MX'er 125 Driver Manual Download Page 4

Page: 4 / 142

Dear Users:

We greatly appreciate your patronage of KYMCO

This

Manual describes the correct operating methods, inspection and

maintenance procedures for the KYMCO

in details in order

to prolong the service life of motorcycle and provide you with a comfortable
riding.

Please note that the information and illustrations included in this manual may
be different from the motorcycle in case specifications are changed.

To enable you to have a safe and comfortable riding, we recommend you to
read this manual carefully and wish you a happy riding.

Note: 1. The information and specifications stated in this manual are for reference

only and subject to change without notice.

2. When starting the engine, the battery must be installed to facilitate starting

and increase the engine performance.

MX'er 150/125/50

150/125/50

User's

MX'er

Summary of Contents for MX'er 125















































































































































Search results

Summary of Contents for MX'er 125

Reviews:

Related manuals for MX'er 125

Brands by name

Popular brands

KYMCO MX'er 125, Driver Manual

Search results

Summary of Contents for MX'er 125

Reviews:

Related manuals for MX'er 125

Brands by name

Popular brands