KYMCO MOVIE 150, Owner'S Manual

Page: 22 / 37

MAINTENANCE
Perform the pre-ride inspection (see page 16) at each scheduled maintenance period. This interval should
be judged by odometer reading or months, whichever comes first.
Maintenance schedule
I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C : CLEAN R : REPLACE A : ADJUST L : LUBRICATE
Maintenance schedule legend (see page 21 and 22):
The maintenance schedule on the flowing two pages specifies the maintenance required to keep your Movie
150 scooter in peak operating condition. Maintenance work should be performed in accordance with
KYMCO standards and specifications by properly trained and equipped technicians. Your KYMCO dealer
meets all of these requirements.
Maintenance schedule notes (see page 21 and 22):
1. At higher odometer readings, repeat at the frequency interval established here.
2. Service more frequently if the scooter is ridden in unusually wet or dusty areas.
3. Service more frequently when riding in rain or at full throttle.
4. Clean every 1,200 mi (2,000 km) after replacement and replace every 3,000 mi (5,000 km).
5. Replace every 2
,
500 mi (4,000 km).
6. Replace every 2 years. Replacement requires mechanical skill.
Should be serviced by your KYMCO dealer, unless you have the proper tools, service data and are
technically qualified.
In the interest of safety, we recommend these items be serviced only by your KYMCO dealer.
KYMCO recommends that your KYMCO dealer road test your scooter after each periodic
maintenance service is completed.
*
**
20