KYMCO LA30AA, Service Manual

Page: 199 / 213

16
. STARTING SYSTEM
16-4
MX’er SYSTEM
CONTINUITY CHECK
Check to confirm that there is no continuity
between the starter motor wire terminal and the
motor front cover.
Also check for the continuity between the wire
terminal and each brush.
Replace if necessary.
Measure the length of the brushes.
Service Limit : 8.5mm replace if below
Check for continuity between the brushes. If
there is continuity, replace with new ones.
Check if the needle bearing in the front cover
turns freely and has no excessive play.
Replace if necessary.
Check the dust seal for wear or damage.
Wire Terminal
Bearing
Dust Seal