(4) BATTERY
This model adopts the battery which needs no refilling of
distilled water.
When cleaning the terminal terminals, remove the screws
attaching the battery cover on the floor board and then
open the battery cover.
When battery terminals are corroded, take out the battery
for cleaning.
After cleaning, apply a thin coat of grease or Vaseline to
battery terminals and then install the battery.
Never open the closed-type battery electrolyte cap.
If the motorcycle will not be used for a long time, the
battery will discharge electricity by itself. Remove the
battery and put it in a cool place after it is fully charged to
prevent electricity leakage.
If the motorcycle will not be used for a long time, remove
the negative (-) terminal.
Do not smoke or allow flames or sparks near the battery
while removing and installing it.
Turn off the ignition switch before removal or installation.
The negative (-) terminal shall be removed first and the
positive (+) terminal shall be installed first.
Tighten the loose terminal nuts securely.
CAUTION:
Battery Charger
32
Battery
