KYMCO AHG1, Maintenance Manuallines

Page: 197 / 244

18. STARTING SYSTEM
18-3
2. Service Information
2.1. General Instructions

The removal of starter motor can be accomplished with the engine installed.

For the starter clutch removal, refer to the chapter 10.

After the starter clutch is installed, be sure to add the engine oil and coolant and then
bleed air from the cooling system.
2.2. Torque Values
Item
Unit
kgf-m N-m
Starter motor mounting bolt 0.7~1.1 7~11
ACG flywheel mounting bolt 5.0~6.0 50~60
2.3. Troubleshooting
Starter motor won‘t turn

Fuse burned out

Weak battery

Faulty ignition switch

Faulty starter clutch

Faulty front or rear stop switch

Faulty starter relay

Poorly connected, broken or shorted wire

Faulty starter motor
Lack of power

Weak battery

Loose wire or connection

Foreign matter stuck in starter motor or gear
Starter motor rotates but engine does not start

Faulty starter pinion

Starter motor rotates reversely

Weak battery