Connection
8
Kyland Opal5G/Opal10G IM-EN-June 2016
4 Connection
4.1 10/100/1000Base-T(X) Ethernet Port
10/100/1000Base-T(X) Ethernet port is equipped with RJ45 connector. The port is
self-adaptive. It can automatically configure itself to work in 10M, 100M, or 1000M state, full
or half duplex mode. The port can also adapt to MDI or MDI-X connection automatically. You
can connect the port to a terminal or network device with a straight-through or cross-over
cable.
Pin Definition
Figure 7 RJ45 Port
Table 3 Pin Definitions of 10/100Base-T(X) RJ45 Port
Pin
MDI-X
MDI
1
Transmit/Receive Data (TRD1+)
Transmit/Receive Data (TRD0+)
2
Transmit/Receive Data (TRD1-)
Transmit/Receive Data (TRD0-)
3
Transmit/Receive Data (TRD0+)
Transmit/Receive Data (TRD1+)
4
Transmit/Receive Data (TRD3+)
Transmit/Receive Data (TRD2+)
5
Transmit/Receive Data (TRD3-)
Transmit/Receive Data (TRD2-)
6
Transmit/Receive Data (TRD0-)
Transmit/Receive Data (TRD1-)
7
Transmit/Receive Data (TRD2+)
Transmit/Receive Data (TRD3+)
8
Transmit/Receive Data (TRD2-)
Transmit/Receive Data (TRD3-)
Note:
"+" and "-" indicate level polarities.