KYLAND KIEN8000, User Manual

Page: 26 / 38

KIEN8000 User Manual
find that the green plastic DIN rail-connecting position has already been fixed on the
rear panel of KIEN8000. The Figure 4-1 shows the size of rail-type mounting. If you
want to mount the switch on the DIN rail, please check mounting of the DIN rail before
mounting the switch. The check shall mainly focus on two items below:
1
．
Ensure the DIN rail is fixed solidly, other units are not on it, and enough space
is reserved for mounting the switch.
2
．
On the DIN rail, make sure there is power input that is suitable for operating of
the switch.
Figure 4-1 KIEN8000 DIN-Rail Mounting Dimensions
After determining the mounting position of the switch, mount it on the DIN rail
according to following steps:
：
1. As showed in the Figure 4-2a, insert the lower part of the DIN rail into the fixing
slot with spring support under the rail connecting seat. Push the bottom panel of
the switch upward slightly and turn it,.
2. As showed in the Figure 4-2b, lock the DIN rail Into the DIN rail connecting
position and confirm reliable mounting on the DIN rail of the switch.
。
-
16
-