17
6.2 Access through Telnet
6.3 Access through Web
Step 1: Connect the network port of the PC to the Ethernet port of the device
with a network cable.
Step 2: Enter the IP address of the switch in the address box of the browser.
The user login interface is displayed. You can log in to the Web UI by
using default user name "admin" and password "123".
Step 3: Click OK. The Telnet CLI is displayed. Then you can run the commands
in Table 8 and Table 9 to perform operations.
Figure 17 Access through Telnet
Table 9 CLI Commands for Aquam8512A
Step 1: Connect the network port of the PC to the Ethernet port of the device
with a network cable.
Step 2: On the Windows desktop, click Start and Run. The Run Dialog box is
displayed. Enter "telnet
IP-address
”. For example, if the IP address of
the switch is 192.168.0.2 (default IP address of a Kyland switch), enter
"telnet 192.168.0.2" in the dialog box.
Note:
IE8.0 or a later version is recommended.
For details about how to access the switch and other operation, refer
to the Web operation manual in the delivered CD.
●
●
