KYLAND Aquam5 Series, Hardware Installation Manual, Page: 9 / 16

4
6) Devices should be installed and accessed by service personnel or users
who have been instructed about the reasons for the restrictions applied to
the location and about any precautions that shall be taken.
Step 1: Select the mounting position (on a inner wall of a cabinet) for the
device and guarantee adequate space and heat dissipation.
Step 2: Punch four holes in the selected position according to the dimensions
of the device. Insert four screws into the four holes with a screwdriver
until about a 5mm distance is left between each screw head and the
wall of a cabinet.
Step 3: Align the four mounting holes on the plate for panel mounting with the
four screws. Insert the screws through the Ф6 positions in the following
figure. Move the device in direction 1 until the four screws are in the Ф
3.5 positions. Then tighten the screws.
Figure 3 Panel Mounting
Screw
Screw
●
Mounting
Step 1: Loosen the screws with a screwdriver. Pull the device upward until the
screws are in the Ф6 positions in the following figure. Then remove the
plate for panel mounting from the screws to detach the device from the
inner wall of the cabinet.
Step 2: Loosen the screws completely with a screwdriver. Remove them from
the inner wall of the cabinet.
Figure 4 Panel Dismounting
Screw
Screw
●
Dismounting
6
1
3.5
2
6
3.5