6
Figure 6 Panel Dismounting
4 Cable Connection
4.1 10/100Base-T(X) Port
10/100Base-T(X) port is equipped with RJ45 connector. The port is
self-adaptive. It can automatically configure itself to work in 10M or 100M
state, full or half duplex mode. The port can also adapt to MDI or MDI-X
connection automatically. You can connect the port to a terminal or
network device with a straight-through or cross-over cable.
Figure 7 shows the pin numbers of the 10/100Base-T(X) RJ45 port.
8 7 6 5 4 3 2 1
Figure 7 RJ45 Port
Table 3 lists the pin definitions of the 10/100Base-T(X) RJ45 port.
