13
Setting Up the RF Dongle
The RF dongle enables the Remote-850 to plug and play on your computer for
quick setup operation. By using it, you only need to plug in the RF dongle into
your USB port, the Remote-850 will be able to operate your MCE and control
mouse
If you are unable to link to your PC, follow the commands below
(1) Press the key on the RF dongle. The LED begins
flashing.
(2) On the Main Remote-850, press
〔
REMOTE SETUP
〕
Setting Connect to set up the connection
and begin matching codes.
(3) Connection is established when the screen
displays a check mark “
√
” & ID address, and the
RF dongle LED light remains off.
(4) Matching takes 10 seconds. If matching fails, an “
2
” will appear; repeat
steps (1) to (3)
(5) The remote control RF module can only be activated in MCE mode
Note:
◆
A ID Address will display on the remote control when matching is
complete.
◆
We recommend you to light up the LED of the RF Dongle after the Remote 850 is
ready to press
〔
Connent
〕
