![background image](http://html1.mh-extra.com/html/kye-systems-corp/genius-sw-m2-1-350/genius-sw-m2-1-350_service-manual_2014668007.webp)
* Note
1.2.1Power/LED indicator failure
Version No.:1.0
Page:7 of 20
Please follow the single flow chart.
It is the best sequence recommended to solve the problem.
Service Manual
SW-M2.1 350
Power/LED
indicator failure
1. The power cord is
improperly connected;
2. The 2P flat cable
between the circuit
board and amplifier
board is improperly
connected;
3. The circuit board
is defective;
4. The power switch is
defective.
1. The line from the power
cord to the power panel is
welded improperly;
2. The power panel is damaged;
3. The CN2 connector becomes
loose or the copper foil
breaks;
4. The CN2 connection is open;
5. The LED indicator is
defective;
6. The power switch is
defective.
Check/repair
Check/repair/replace
Summary of Contents for Genius SW-M2.1 350
Page 1: ...Service Manual SW M2 1 350 Service Manual KEY SYSTEM CORP Version No 1 0 Page 1 of 20...
Page 14: ...Service Manual SW M2 1 350 Chapter II Specification Version No 1 0 Page 14 of 20...
Page 17: ...Page 17 of 20 Satellite Service Manual SW M2 1 350 Version No 1 0...
Page 20: ...Version No 1 0 Page 20 of 20 Service Manual SW M2 1 350 Chapter VI Electric Schematic Diagram...