![background image](http://html1.mh-extra.com/html/kye-systems-corp/genius-sw-5-1-1010/genius-sw-5-1-1010_service-manual_2014652007.webp)
Service Guide
SW-5.1 1010
*Attention
Please follow the numbered sequence marked within parenthesis given in
individual
Flow chat in that this is the best-recommended sequence to rectify the problems.
1.2.1 No power
,
LED
(
indicator
)
unlighted
Problem
Analyze
and
identify
the
causes
Solutions
Version 1.0 Page 7 of 26
Repair or replace
Power switch
defective or
damaged
Defective transformer,
or AC cable or poor
connection of both
Repair or replace
No power
,
LED
(
indicator
)
unlighted
1. Poor connection between JK2 and JK4
2. PT1 in PCB dried –soldered or loose off
3. IC7 in PCB damaged or loosen from
PCB
Repair or replace
Summary of Contents for Genius SW-5.1 1010
