ENGLISH
18
6.
The weight will be displayed for about 5 seconds, then the scales will turn
off in order to conserve battery power
7.
To make an additional measurement, you have to get back again on the scale platform
LTK610
1.
Install no.1 3V CR2032 lithium battery in the battery compartment,
matching the indicated polarity
2.
Select the correct units on the back of the balance acting on the switch
that is always located inside the battery compartment (LB = LB / KG = KG / ST = Stone)
3.
Please note that this must be done only once, during the first usage.
4.
Place your scale on a flat and clean surface.
5.
Switch on the scales by a slight tap on the glass platform.
6.
When the display will show “0.0”, step on the scale and put your feet evenly
on the scales without moving
7.
The weight will be displayed for about 5 seconds, then the scales will turn
off in order to conserve battery power
8.
To make an additional measurement, please repeat the procedure from point “4”
LTK615
1.
Install no.1 3V CR2032 lithium battery in the battery compartment,
matching the indicated polarity
2.
Switch on the scales by a slight tap on the glass platform
(LB= libbra / KG= Kilogrammo / ST= Stone)
3.
Please note that this must be done only once, during the first usage
4.
Place your scale on a flat and clean surface
5.
When the display will show “0.0”, step on the scale and put your feet evenly
on the scales without moving
6.
The display will switch on and your correct weight will be displayed.
7.
Once it measured the weight, the display will flash three times and then it
will continuously indicate the measured value
8.
The weight will be displayed for about 5 seconds, then the scales will turn
off in order to conserve battery power
9.
To make an additional measurement, please repeat the procedure from point “4”
CLEANING
For the scale cleaning, use only a damp cloth and mild detergents. Then dry thoroughly
before using the device.
CONDITIONS OF DISPOSAL
INSTRUCTIONS FOR THE PROPER DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH DIRECTIVE 2002/96/EC
At the end of its life, the product should not be disposed of as waste. It can be taken to the
special collection points, set up by municipalities or to a dealer providing this service. The
separate disposal of the product avoids possible negative consequences for the environment
and human health, deriving from inappropriate disposal and it allows you to recover the
materials it is made in order to obtain significant savings in energy and resources. To
emphasize the need to dispose of medical equipment separately, the product is marked with