10
Chapter 6 - Instrument Management
024 V1
Chapter 6
Instrument Management
The instrument management of the SW 024 runs exclusively via the AMA 310/UMS.
6.1
FPGA Version Readout
To read out the FPGA version of the SW 024, the switch has to be connected to the AMA 310/UMS
by the USB patch cable and both units have to be switched on. The AMA 310/UMS has to be in the
basic state (see operating instructions of AMA 310/UMS).
By the key combination
MODE
→
SERVICE
→
HARDWARE
the version numbers of all
configurable boards in the instrument will be read. By the soft key
>>>
(i.e. by the
F4 key
) the last
menu page may be chosen. Here the FPGA version of the SW 024 may now be read behind the
item "SWITCH-MATRIX 261L48".
Figure 6-1 Retrieval of the FPGA Version of the SW 024
