7
CLEANING AND SANITIZING
IMPORTANT:
To maintain the appearance and increase the service life, clean your equipment
daily after use.
TO AVOID SERIOUS PERSONAL INJURY:
•
BEFORE CLEANING, SERVICING, OR DISASSEMBLE ANY PARTS, always turn bone saw OFF
and unplug unit.
•
NEVER attempt to clean bone saw while bone saw is in operation.
•
DO NOT put components in the dishwasher or immerse base in water.
•
DO NOT hose down, pressure wash, or pour water on bone saw.
•
NEVER use a scrubber pad, steel wool, or abrasive material to clean bone saw.
•
Allow the parts to air dry before placing them back on bone saw.
BONE SAW DISASSEMBLY, CLEANING & SANITIZING
1.
Make sure the unit is turned OFF and unplugged.
2.
Wear cut resistance gloves before handling the saw blade.
3.
Open the door by turning door locking knobs in clockwise direction.
4.
Remove the door by lifting it upward.
5.
Use your left hand to hold the blade while the right-hand releases it
by pushing down the blade tension
regulator.
6.
Remove impeller guide from working table.
7.
Remove upper pulley by lifting it upward then outward.
8.
Remove the water tray from the base.
9.
Clean and sanitize all removed parts with a neutral detergent and
warm water solution to remove fatty oils.
DO NOT
soaks your removed parts.
10.
Clean and sanitize the rest of the machine with a neutral detergent and warm water
solution.
11.
Make sure that all parts and surfaces are fully air dry before reassembling the unit.
12.
Close the door and tighten both upper and lower door locks.
7
6
2
5
