1
2
1 / 4
Kwikset Technical Support: 1-866-863-6584 • www.kwikset.com
Installation and User Guide
ENGL
IS
H
66452-001
Rev 01
914C
Z-Wave® Plus
View interactive, animated
instructions online at
http://kwik.st/convert-zw
or continue to use the
paper instructions.
Tools needed
4 AA batteries
Optional: Masking tape
Existing key
Phillips head screwdriver
Ruler
Online interactive instructions
Kit "A"
Kit "B"
Kit "C"
Mounting
plate screws
Mounting
plate screws
Mounting
plate screws
Black mounting
plate
Interior
cover
Interior
assembly
Battery
pack
Silver mounting
plate
Gold mounting
plate
Black adapter
Gold adapter
Gold adapter
Black adapter
Silver adapter
Interior assembly
screws
Interior assembly
screws
Interior assembly
screws
Interior cover
screws
Interior cover
screws
Interior cover
screws
Prepare your door
Determine the parts needed for your door
Make sure your existing deadbolt is compatible. If you have a standard deadbolt mounted
separately from the handle below it, it is compatible with Kwikset Convert.
Make sure your door is aligned before
proceeding with installation.
A
B
Look into the hole in your door.
What shape is your torque blade (the part sticking out through the latch)?
For a list of compatible deadbolt
models, please see the Kwikset
Convert page at www.kwikset.com
Mortise
Lock
Not Compatible
Not Compatible
Rim
Lock
Integrated
Interior
Not Compatible
Compatible
D-shape
Kwikset and Weiser deadbolts:
Use kit “A” for your door.
Baldwin Reserve and
Baldwin Prestige deadbolts:
Use kit “B” for your door.
You will need the black adapter
and the thicker gold screws.
thicker
screws
Vertical rectangle
Baldwin Estate deadbolts:
Use kit “B” for your door.
You will need the gold adapter
and the thinner gold screws.
thinner
screws
Slanted rectangle
Schlage deadbolts:
Use kit “C” for your door.
You will need the silver adapter.
Horizontal rectangle
Schlage deadbolts:
Use kit “C” for your door.
You will need the gold adapter.
Make sure your door is open and
extend your latch bolt. Make sure your
key is NOT in the deadbolt exterior.
extended
Remove all existing deadbolt hardware
from the interior side of your door.
D
Optional: Secure your deadbolt
exterior with masking tape.
E
Measure to confirm that your door is either
1-3/8" or 1-3/4" (35 mm or 44 mm) thick.
1-3/8"or 1-3/4"
35 or 44 mm
C
F
You should be able to lock and
unlock your door smoothly
without any resistance, and
without pushing, pulling
or lifting your door.
If your door is not aligned, you
may need to order a Warped
Door Service Kit, available
through Kwikset Support:
1-866-863-6584
