Install the latch and strike
Kwikset Technical Support
1-866-863-6584 • www.kwikset.com
Prepare the door and check dimensions
Full smart lock vs interior conversion kit
1
2
3
1 / 4
If drilling a new door, use the supplied template and the complete
door drilling instructions available at www.kwikset.com/doorprep
Note: Additional door preparation may be
required for doors with 1-1/2" (38 mm) holes.
Consult the deadbolt drilling instructions at
www.kwikset.com/doorprep
or
bac
kse
t
Measure to confirm that the hole in
the door is either 2-1/8" (54 mm) or
1-1/2" (38 mm).
Measure to confirm that the backset is
either 2-3/8" or 2-3/4" (60 or 70 mm).
2-3/8" or 2-3/4"
60 or 70 mm
1-3/8" or 1-3/4"
35 or 44 mm
Measure to confirm that the hole in
the door edge is 1" (25 mm).
Measure to confirm that the door is
either 1-3/8" or 1-3/4" (35 mm or 44
mm) thick.
A
B
C
D
2-1/8"
54 mm
1-1/2"
38 mm
1"
25 mm
This package contains a full smart lock set as well as interior
parts that can be used with your existing deabolt exterior
to convert your mechanical lock into a smart lock.
The following steps will show you how to install the
full smart
lock set
. If you are installing the interior conversion kit, please
refer to the other instruction sheet in the package.
Is the door edge chiseled?
Which latch are you installing?
YES
NO
Use latch “J”. If the
latch bolt is not already
extended, extend the
latch bolt as shown.
wood
block
"UP" is
on top
"UP" is
on top
Use latch “K” (not
included). If the latch
bolt is not already
extended, extend the
latch bolt as shown.
Latch “J”
Latch “K”
Longer screws
install closest to
the door jamb.
door frame
Install strike on the door frame.
Make sure the hole in the door frame is drilled a
minimum of 1" (25 mm) deep.
or
chiseled
not
chiseled
or
Is the D-shaped hole centered in the door hole?
Hold the latch in front of the door hole, with the latch
face flush against the door edge.
YES
NO
No adjustment is required.
Proceed to next step.
D-shaped hole
D-shaped hole
Rotate latch face as
shown to extend latch.
actual
size
A
D
E
B
C
Strike
Latch screws
Strike screws
Keys
SmartKey
tool
Latch
“K” is not included. If
needed, please contact
Kwikset to order a drive-in
latch for your lock.
Exterior
Assembly
Drive-in
latch
03809
46780
Ruler
Phillips head screwdriver
4 AA batteries
Existing key
Required Tools
Signature Series Deadbolt
with Home Connect
Installation and User Guide
E
N
GL
ISH
66494-002
Rev 02
914C
ZigBee® C4
Full Lock
or
Full smart lock set
New Interior
New
Exterior
New Latch
Interior conversion kit
New Interior
Existing
Latch
Existing
Exterior
Black mounting
plate
Gold mounting
plate
Silver mounting
plate
Interior
cover
Interior
assembly
Battery
pack
Adapter
ring
Cylinder
guard
Guard
cover
Cylinder
Black adapter
Black adapter
Kit “A”
Kit “B”
Kit “C”
Interior
Assembly
Mounting
plate screws
Mounting
plate screws
Mounting
plate screws
Gold adapter
Gold adapter
Silver adapter
J
P
(x2)
P
Q
S
R
J
K
K
S
(x2)
L
R
(x2)
J
K
J
K
Interior assembly
screws
Interior cover
screws
P
R
S
Q
T
U
W
K
L
M
N
A1
B1
X2
B2
B3
X1
X1
A2
A3
C2
F
G
H
V
E
J
D
X2
X3
C1
Interior assembly
screws
Interior cover
screws
E
Interior assembly
screws
Interior cover
screws
E
D
D
