CAUTION!
•
This vanity cabinet is NOT designed to carry the weight of child or an adult. To avoid injury and damage to the vanity cabinet, never sit on, stand
on, or hang off the installed wall hung cabinet.
CARE AND MAINTENANCE
•
Wipe down the vanity using warm soapy water on a damp cloth.
•
Do not use harsh detergents, corrosive chemicals, or abrasive cleaners.
•
When cleaning the cabinet, make sure all moisture from the damp cloth has been removed with a dry cloth.
•
The cabinet is water resistant not waterproof. Make sure that the bathroom is well ventilated to prevent moisture
build up. Do not allow water to sit on vanity for a long time, ensure that the water is removed as soon as possible to prevent swelling.
5. Install the doors. Tip - Align the small hooks
on the door hinge into position & then lift the
tab on the end of the door bracket and press
into position.
6. Stand the cabinet up and check the doors
for alignment. Tip - Small adjustments can be
made to align the doors by turning the 2
screws in the middle of each hinge.
5
6
7
7. Position cabinet in desired location ensuring
the cabinet does not fouI with existing
plumbing. If you have a floor waste pipe, you
will need to mark out the location on the base
board and shelf of the cabinet and using a
hole saw, drill a hole to suit the size of the
plumbing in the marked-out location.
8. Once the vanity top (available separatly) is
installed, we recommend applying anti-fungal
wet area silicone to seal the back and sides at
the wall junction to ensure water cannot get
behind the vanity and cause damage. Allow
recommended drying time (refer to sealant
instructions) before first use.
8
