INSTALLATION GUIDE
Kwiksemble Vanity
INSTALLATION
https://www.youtube.com/watch?v=USMQKJRZQxw
2. Gently lay the cabinet down on its back.
Tip - Help protect the cabinet by placing a
towel down over hard surfaces.
3. Install the baseboard shelf and middle shelf.
Tip - slide each shelf into position evenly, align
the interlocking black brackets and press into
position.
1
2
4. Install the kickboard. Tip - Align the brackets
on both sides and press firmly into position.
Point your smartphone camera at the
QR code below to watch the
step-by-step assembly video!
Or search Kwiksemble on Youtube
1. Unfold the main cabinet untill all hinges click
into place. Tip - Open each side in small
increments at a time to evenly open the
cabinet.
PARTS
1
x pre-assembled
foldable cabinet
1
x pre-assembled
base board
1
x pre-assembled
shelf
1
x kickboard
2
x pre-assembled
doors
IMPORTANT!
•
Thoroughly inspect all parts and components for damage or defects. Warranty claims for damage or defects will not be accepted after
installation.
•
Read through these instructions carefully and retain for future reference.
•
It is recommended that this vanity unit is installed by a licensed trades person.
•
All plumbing must be installed by a licensed plumber.
•
Under no circumstances should vanities and/or basins be tiled into the wall.
•
This product must not be installed in an area where it may be exposed to splashing water from a bath or shower.
3
4
INS KWK FC V1
22/10/20
