NZ464 Rev. 11/11/20
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
4.
Hardware for steps 4 through 12
is in
Goal Hdw
pack.
Attach left post and right post to crossbar using channel spacers and 3/8” hardware. Note direction of decals
on crossbar before fastening. Place a 3/8” square nut in each side of the crossbar and both posts before
inserting channel spacer. Be sure connections are pressed firmly together before tightening hex bolts.
5. Insert two 3/8” square nuts in slot located in each of the assembled posts.
Left Post
Right Post
Crossbar
Decals
3/8” Square Nuts
One
One
3/8” X 1-3/4” Hex Bolt
Channel Spacer
3/8” Flat Washer
Right Post
3/8” Lock Washer
Crossbar
3/8” Square Nuts
