12"
Minimum
Temporary
3/8" X 7/8" Hex Bolt
Spacers (metal)
Threaded Channel
Left and Right Bases
For straight wheels only
3/8" X 1-3/4"
Hex Bolt
Lock Washer
Flat Washer
Post
Post Brace
Base
Channel Spacer
(plastic)
Flat Washer
Lock Washer
3/8" X 1-3/4"
Hex Bolt
3/8" X 1-3/4"
Hex Bolt
Lock Washer
Flat Washer
Post
Post Brace
Base
Channel Spacer
(plastic)
Flat Washer
Lock Washer
3/8" X 1-3/4"
Hex Bolt
Crossbar
Right Post
Left Post
Crossbar
Base
Lift
Lift
5. 2B3006 (10B410 straight wheels) - continue with step 5.
2B3006 (no wheels) - skip to step 6.
2B3006SW (10B414 swivel wheels) - skip to step 6.
Insert two threaded channel spacers from wheel package.
To prevent threaded channel spacers from falling out during
assembly, temporarily insert a 3/8” hex bolt in last threaded
hole of threaded channel spacer and finger tighten only.
6. Lift and insert assembled bases onto assembled posts. Fasten using channel spacers, post braces, and 3/8” hex
bolts. Be sure connections are pressed firmly together before tightening hex bolts.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ297 Rev. 07/17/17
