3/8” X 1-3/4” Hex Bolt
3/8” Flat Washer
Right Base
3/8” Lock Washer
Crossbar
Channel Spacer
(plastic)
Crossbar
Left Base
Right Base
Decals
5. Attach to Crossbar using channel spacers and 3/8”
hex bolts. Note direction of decals before
fastening. Be sure connections are pressed firmly
together before tightening hex bolts.
6.
2B2001SW
- skip to step 8, for all other goals
continue to step 7.
7. Insert two 3/8” square nuts into left base and right
base.
NOTE: If installing optional wheels (Part#
10B409), also include two threaded channel
spacers from wheel option package in each
base.
To prevent threaded channel spacers or
square nuts from falling out during assembly,
temporarily insert a 3/8” hex bolt in last threaded
hole of the threaded channel spacer or square nut
and finger tighten only.
Threaded Channel Spacer (metal)
(for wheel option 10B409)
Left & Right Base
3/8” Square Nuts
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ255 Rev. 09/11/18
Temporary
3/8" x 7/8" Hex Bolt
12"
3/8" Square Nut
Threaded Channel Spacer
(For wheel option 10B409)
