140 Pacific Drive Quakertown, PA 18951 / (215) 536-2200 / Fax (215) 536-4309
Visit our website @ www.kwikgoal.com
KWIK
GOAL
NZ197 Rev. 9/16/04
INSTRUCTION FOR 10B2601 STEEL ANCHOR WEIGHTS
Parts List
1. Set goal in desired location.
2. Insert 2 weights (B) into each weight bag (A) and close bag. See figure 1.
3. Attach two weight bags to the rear of each goal using chain (C) and snap link (D). See figure 2.
4. With chains and weights properly connected to goal, see figure 3 for test procedures to assure
that goal has been anchored properly.
CAUTION: GOALS MUST BE PROPERLY ANCHORED OR STORED AT ALL TIMES.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal post must be
anchored AT ALL TIMES and shall be secured against tilting. Do not climb on the net or
goal framework at anytime! All fastenings must be checked to insure they are fully
tightened before and after each use of this product. Goal posts not in use must be
disassembled and properly stored in a safe secure area. (See Guidelines for Moveable
Soccer Goal Safety, included.) Assembled goal posts should not be left unattended.
Remove nets when goals are not in use. Do not use this equipment in the threat of high
winds. Goal post should be checked for safety before and after each use. All warning
and safety labels included with this product must be visible at all times. Any
modifications to this or any Kwik Goal product will void any and all warranties.
A) Weight Bag
(2)
B) Weight
(4)
C) Chain
(2)
D) Snap Link
(2)
Snap Link (D)
Weight Bag (A)
Weight (B)
Chain (C)
