Minimum System Requirements
Intel Pentium II 350 MHz Compatible or MAC G3 Processor & greater
Microsoft Windows XP / Vista / 7 / 8 compatible
For USB 3.0 speed, the system must come with USB 3.0 specifications
Download Application Software ONE TOUCH BACK UP [OTB]
NOTE:
OTB software support Windows XP/Vista/7 only.
Please follow below steps to download and install the application software:
1. Download free OTB software from attached CD
2. Select the proper OTB software and download it to your computer
3. Execute the file and follow the installation procedures of the installer
4. Refer to the operation guide of the application software for more information
4. Formatting Hard Drive
If you are using new/unformatted hard drives, you will need to first format and partition the drives before your operating
system will recognized them. Please refer to the documentation included with your hard drive and/or operating system
for more information about correctly formatting a hard drive.
5. DOCKING STATION OPERATIONAL INSTRUCTIONS
The dual bay clone dock primarily functions as a two-bay drive dock that allows you to easily connect up to two hard
drives to your computer through a single USB connection.
1.
Before you power on the unit, insert your SATA hard drive(s) into the Disk 1 and/or Disk 2 bay. Be sure that the
hard drives’ SATA connectors align with the SATA connectors within each bay.
2.
Use the provided USB cable to connect the dock with a USB port on your computer.
3.
Flip the power switch located on the rear side of the dock. The LED indicator will light up and the hard drives will
be powered up.
4.
Your computer will automatically detect the newly connected device and drives. It may need a minute or two to
install the necessary drivers. The Dock uses drivers that are already built into your OS. Additional drivers are not
required to this product.
5.
Once the computer has recognized the drives, they will show up under My Computer if you are using a Windows
operating system or on your desktop if you are using a Mac OSX operating system.
NOTE:
Do not remove the hard drives from the dock, or disconnect the dock from the USB port of your computer while
copying files to or from the device or while files or applications stored on the hard drive are in use. DOING SO
MAY RESULT IN LOSS OF DATA
