15
ASSEMBLY
1. Place the recoil spring onto the bolt assembly.
2. Lock the bolt assembly onto the upper frame.
3. Install the upper frame onto the lower frame and align the bolt knob hole. Make
sure the hook underneath the bolt hooks onto the impact block
4. Push the bolt knob into the bolt assembly and push the slide assembly to the
rear.
5. Align the retaining pin holes.
6. Insert the 2pc retaining pins.
7. Cycle the bolt to ensure proper assembly before shooting.
8
WARNING: Make sure safety is on at all times when not in a
shooting position.
SELECTOR
The selector is located on the left side of the frame. Select (S) to fire semi-automatic
(single shot) and select (F) to fire full automatic (continuous fire).
SAFETY
The safety button is located in front of the trigger. Safety is engaged when you push
safety button to “SAFE”. Safety is disengaged when you push safety button to “FIRE”.
When the bolt is closed, bolt can be locked for storage by turning the bolt knob 90˚
counterclockwise.
S
S
2
3
4
6
1
!
SAFE
FIRE
S
F
Retaining Pin
Retaining Pin
Semi-Auto
ON OFF
Full-Auto
M11A1 NS2
Recoil
Spring
Assembly
Bolt Assembly
Upper Frame
Lower Frame
Bolt Knob