Diajekt Control CFC10
30
Status: 06/18/2014
Figure 22: "Firmware" tab
The control unit
‟s firmware can be updated with the “
DiajektConfig
” tool. This is done by
choosing an existing firmware file. The firmware is transmitted to the control unit by the push of
a button.
Figure 23: "Error Memory" tab
All the data in the
control unit‟s error memory can be transferred from the control unit at the
push of a button. They are displayed in table form. All entries in the control unit‟s error memory
can be deleted at the push of a button.