TABLE OF CONTENTS
1
CONTENTS
INTRODUCTION & CONTENTS .................................................. 1
FEATURES ................................................................................... 2
SPECIFICATIONS ........................................................................ 2
PANEL DESCRIPTIONS .............................................................. 3
CONNECT & OPERATION ........................................................... 4
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this
manual for future reference.
INTRODUCTION
The HDMI-CATSPU-X series combine the extender and splitter
functions to split (1) HDMI signal to (4) or (8) identical HDMI signals
via a network cable. These extenders work with (4) or (8) receivers
to transmit the HDMI signals up to ~394 ft/120M.
The IR signal transmission controls the source device operation for
long distances and it is widely applied in HD audio visual display
rooms, exhibition centers and digital monitoring systems. These
products have a 3 year warranty.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
•
HDMI-CATSPU-4 HDMI Extender Splitter
•
(4) IR Blaster Extension Cables
•
(5) DC5V/2A power adapters
•
Users Guide
•
HDMI-CATSPU-8 HDMI Extender Splitter
•
(8) IR Blaster Extension Cables
•
(9) DC5V/2A power adapters
•
Users Guide
Installation Requirement
•
HDMI source device (computer graphics card, DVD, PS3,
HD monitoring equipment etc.)
•
HDMI display devices such as a SDTV, HDTV or a projector
with a HDMI port
•
HDMI extender RX which supports HDBitT transport protocol
•
UTP/STP CAT5/5e/6 cable, following IEEE-568B standards
•
Network cable length supported between connections:
•
CAT5 ~262 ft/80M
•
CAT5E ~328 ft/100M
•
CAT6 ~394 ft/120M
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without the express written permission and consent.
© Copyright 2016. All Rights Reserved.
Version 1.1 AUG 2016
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
