EDID FUNCTION
Mode 5 . H36-3D-M (1080p-36 bits)
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH
Mode 6 . 4K2K (24/30Hz)
HDMI Support : 4K2K-3D, PCM 2CH (3860x2160-24/30Hz)
Audio Support: PCM 2CH
Mode 7 . 1920x1200-60Hz (DVI-D)
DVI Support : DVI-D 1920 x 1200 60Hz
Mode 8 . AUTO <Default>
All Outputs will be set to the highest common resolution of all connected
display devices.
LEARNING EDID
Learning EDID from Destination to Source
Learning EDID Setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION
Button: The LCM will be show LEARNING.
Switcher will
LEARN
destination HDMI EDID and pass the selected source.
Learning EDID setup for HDMI:
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
NOTE : The already learned EDID cannot be modifi ed. You can only rebuild a new Learning EDID.
For example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when you
want to remove the learning EDID memory from EPROM.
LEARNING EDID defi nition
Learning EDID from Destination to Source
1. Switcher will
LEARN
destination
EDID
and pass the selected source.
2. To set up learning between a single destination and single source: Press
EDID
button > Press
Destination
1 thru 8 > Press
Source
1 thru 8 > Press
ENTER
to confi rm. Switcher will learn destination EDID to source device.
3. To set up learning between a single destination and Multiple sources: Press
EDID
button > Press
Destination
1 thru 8 > Press the
majority
Sources
1 thru 8 > Press
ENTER
. Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources. Press
EDID
button > Press
ALL
button > Press
ENTER
to confi rm.
Auto mode defi nition
Common Resolution and Audio
Switcher will fi nd highest common Resolution and Audio from all destination EDID to link Source.
Example for single source
Destination > press #1 and then Source > press #1
Destination device #1 will set to the highest common resolution and Audio of source #1
Example for multiple sources
Destination device #1, #2, #3 will be set to the highest common resolution and Audio available and source device #1 will output this
same resolution.
16
