IR EXTENDER
REAR PANEL IR EXTENDER PORT
NOTE: The SB-100 IR Receiver is required when using the port “ALL in” jack.
NOTE: The SB-100C IR Receiver will not work on the port “ALL in” jack.
Note: When you plug the External IR extender into the switcher, the front panel IR receiver remains active.
IR EXTENDER PACKAGE :
HOW TO SETUP THE IR EXTENDER RECEIVER COMPONENTS
Pin confi guration for IR 984 feet (300 meters) Extender Receiver such as SB-100 compatible
Pin confi guration for IR Receiver 6 feet (2 meters) cable such as SB-100C compatible
Note: The External IR jack has voltage on the “Ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka:
stereo plug). Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off.
15
