KVM-TEC masterEASY Manual Download Page 38

Page: 38 / 44

74 | kvm-tec

kvm-tec | 75

4. netWoRK SettInGS

4.2.14. eaSY cRoSS MoVe - SoftWaRe featURe

SoftWaRe featURe

Easy Cross Move is a software feature that is activated when frontbridging is
used.

both PCs can be operated with one mouse and one keyboard

2 local Units + 1 remote Unit = easy cross Move with 1 keyboard & 1
mouse

both PCs can be opera-
ted with one mouse and
one keyboard

2 local Units + 1 remote
Unit = easy cross Move
with 1 keyboard & 1
mouse

Local Unit single |

Local Unit single

remote Unit dual

EASY CROSS MOVE

4. netWoRK SettInGS

4.3 cHanGe tHe local SettInGS

View the local or remote Extender settings:
- Press the

button to display the Local Setting menu.

USB Compatibility Mode

Disabled/Enabled

USB Remote Wakeup

Disabled/Enabled

Compatibility with Linux

Disabled/Enabled

Bandwidth Reduction

VGA Parameters

4.3.1 bandWIdtH RedUctIon

Here the bandwidth can be reduced. Press the

key to access the settings.the basic setting is 0!

You can change the bandwidth with +/- or u/d.

Summary of Contents for masterEASY













































Search results

Summary of Contents for masterEASY

Reviews:

Related manuals for masterEASY

Brands by name

Popular brands

KVM-TEC masterEASY, Manual

Search results

Summary of Contents for masterEASY

Reviews:

Related manuals for masterEASY

Brands by name

Popular brands