30 | kvm-tec
kvm-tec | 31
2. INSTALLATION Of The exTeNder
2. INSTALLATION Of The exTeNder
2.6 QUIcKInStallatIon MaSteRflex SInGle In fIbeR
1.
Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power
supply.
2.
Now connect the USB cable to a USB port on your PC and connect the other end
of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON
/ Remote Unit.
3.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
4.
Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in).
5.
Then connect the monitor with the DVI cable to the CON / Remote Unit.
6.
Opt: Connect PC audio/out with the audio cable to local audio/in. Connect audio/
out via the audio cable
7.
Almost done! Opt: Connect the audio cable local audio/out to the PC audio/in and
remote audio/out with audio cable to the microphone
8.
Using a switch: Connect all endpoints to the switch. Ensure that all connections
have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP
snooping.
9.
Almost done! Connect the audio cable Local audio/out to the PC audio/in and
Remote audio/out with the audio cable to the microphone
Power plug 12V 1A
Power plug
12V 1A
USB to PC
DVI in from PC
DVI to Monitor
USB from Keyboard and mouse
OM3-Fibercable up to 500m/1640ft (redundant)
OM3-Fibercable up to 500m/1640ft main link
Audio to PC
Audio from PC
Audio from Microphone
Audio to Speaker
D
VI out
to Monitor
Power plug 12V 1A
(redundant)
Power plug
12V 1A (redundant)
2.7 QUIcKInStallatIon MaSteRflex dUal In fIbeR
1.
Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power
supply.
2.
Now connect the USB cable to a USB port on your PC and connect the other end
of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON
/ Remote Unit.
3.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
4.
Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in).
5.
Now connect the DVI cable to the DVI socket of the PC and the other end to the
DVI socket of the CPU / Local Unit (PC-in 2). Then connect the monitor with the DVI
cable to the CON / Remote Unit.
6.
Connect PC audio/out with the audio cable to local audio/in. Connect audio/out
via the audio cable
7.
Almost done! Connect the audio cable local audio/out to the PC audio/in and
remote audio/out with audio cable to the microphone
8.
Using a switch: Connect all endpoints to the switch. Ensure that all connections
have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP
snooping.
Power plug 12V 1A
Power plug
12V 1A
USB to PC
DVI in 1 from PC
DVI to Monitor 1
USB from Keyboard and mouse
OM3-Fibercable up to 500m/1640ft
OM3-Fibercable up to 500m/1640ft main link
Audio from PC
Audio to PC
Audio to speaker
Audio
from
Microfone
DVI to Monitor 2
DVI in 2 from PC
Power plug
12V 1A (redundant)
Power plug 12V 1A
(redundant)
Summary of Contents for 6012
Page 45: ...88 kvm tec 11 Notes ...
