KVM-TEC 6011, User Manual, Page: 9 / 37

16 | kvm-tec
1. introduction
1.5 ABOUt tHe stAtUs Led
The Status LED (8/15) can light red, orange or green. Table 1 shows the meaning of each colour.
Also see chapter
Troubleshooting .
Normal Operation
* MX only ** Rem. Only
Meaning of LED indicators
colour Blinking Physical
Link
Active
connection
video
extended UsB
Initialisation UsB data
Received
Identify
command Autoupdate
mode
Red - Yes No No Update Failed
Red Slow No No No
Orange - Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow - No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
main Led
RJ45 socket Leds *
kvm-tec | 17
1.6 unPACKIng And ChECKIng ThE ConTEnTS
Before using the product for the first time it should be checked for damage. In case of
damage due to transport inform the carrier immediately. Before delivery the product is
checked for its function and its operating safety.
• Make sure that the packaging contains the following content:
SMARTflex Single
local/CPu unit
1 x SV1 local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x DVI-DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x rubber feet
Remote / cON Unit
1 x SV1 remote/CON
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
4 x rubber feet
SMARTflex dual
local/CPu unit
1 x SV2 local/CPU
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
1 x DVI-DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x rubber feet
Remote / cON Unit
1 x SV2 remote/CON
1 x wall power supply unit 12 V 1A (EU-plug or Int plug)
4 x rubber feet
1. INtROdUctION