USB frrom
keyboard and mouse
Networkcable CAT 6a/7 up to 100m/328ft
RS232
UVX1 CPU
dp in
aux
dp out 1
dp out 2
audio
4k displayport 1.2 kvm-extender
power/status
100-240V AC
50-60Hz 24VA
red. Power
12V 2A
usb 2.0
power plug
12V > 2A
Earth
connection
power plug
100-240 VAC
DP in
from PC
USB to PC
Audio to PC
Audio
to PC
DP out
to Monitor
DP out to Monitor
RS232
UVX1 CON
aux
usb 2.0
dp out 2
audio
4k displayport 1.2 kvm-extender
power/status
100-240V AC
50-60Hz 24VA
red. Power
12V 2A
Audio from
microphone
Audio to
speaker
power plug
100-240 VAC
DP to
Monitor
DP to
Monitor
power plug
12V
>
2A
Quick Installation ULTRALINE 4K
local / CPU – remote / CON
1. Connect the CON / Remote and the CPU / Local Unit with the supplied IEC power cable. Optionally, you can also use a 12V
>
2A
power supply.
2. Now connect the USB cable to a USB port on your PC and connect the other end to the CPU / Local Unit. Connect keyboard and
mouse to the CON / Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a network cable.
4. Connect the DP cable in the DP socket of the PC -in and to the DP socket DP / in of the local device and connect the screen on the
remote side with the DP cable. Optionally, connect the DP cable from the Local DP / out to another monitor.
5. Then connect PC audio/out with the audio cable to Local audio/in. Connect audio/out via the audio cable
6. Almost done! Now connect the audio cable Local audio/out to the PC audio/in and Remote audio/in with the audio cable to the micro-
phone.
HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years)
Please note that the recommended length of the display port cable should be max. 1.8m,5.9 ft otherwise interference-free
4K transmission may not be guaranteed.
VIDEOADAPTER
Please use a video adapter with 60 Hz (for video adapters with 30 Hz
the screen will turn black and it would be a pity if you couldn‘t see the great 4K image.)
OUR RECOMMENDATION
Club 3D - Type CAC - 1070
FIBERCABLE
Please also use an OM3 cable to have enough bandwidth